#############################################################################
Mainboard :TANK-610-BW (SAE2)
System    : TANK-610-BW (SEN3)
Chipset   :SOC(Braswell)+IT8519+F81866+LAN1-I210+LAN2-I210+ALC662
VSCC Table:W25Q64DW W25Q64FW
=============================================================================
WDT: Int 15h                                          (F81866)
 ax = 6F02h
 bl = value.
 bl = 0 (Stop counter)

DIO: Int15                                              (F81866)
 Input ax=6F08h
  al:bit 0-3 
 output ax=6F09h
  bl:bit 0-3
=============================================================================
CPU Microcode : 
M01406C1   M01406C2  M01406C3  M01406C4
===============================================================================
Note:
1.The RTC time is wrong when run AT test
2.The 3D & USB3.0 fail with burnIn test.
===============================================================================
#############################################################################
# BIOS:     SEN3AR13   (Base on SEN3AR12)
# Date:     2016/10/27
# CheckSum: 4B99H
# Sign-on Message:SEN3AR13
# EC Version     :SEN3ER12
#############################################################################
1.Debug it hang 31 when change Memory.
#############################################################################
# BIOS:     SEN3AR12   (Base on SEN3AR11)
# Date:     2016/8/24
# CheckSum: B398H
# Sign-on Message:SEN3AR12
# EC Version     :SEN3ER12
#############################################################################
1. Modify AT to ATX mode for QTS mode.
2. When QTS mode:
[BIOS default] Advanced / SATA Configuration / Hot plug --> Enabled
[BIOS default] Chipset / System Agent (SA) Configuration / Graphics Configuration / Primary Display --> IGFX
3.Disable HSIC Port 1/2.
4.Update Microcode
#############################################################################
# BIOS:     SEN3AR11   (Base on SEN3AR10)
# Date:     2016/5/31
# CheckSum:CF5A H
# Sign-on Message:SEN3AR11
# EC Version     :SEN3ER11
#############################################################################
1.Modify BIOS_SIGNON_MESSAGE2.
2.Fixed the issue :after clearing cmos ,UUID can't be saved .
3.Fixed it can't load to default time and date ,after clearing cmos by jumper.
4.The workaround of DOS white line.
5.Fixed the issue when set Administrator password ,press enter will enter bios setup
6.Modify some items according to bios setup spec.
7.Fixed it can't support hot plug in DOS.
8.Fix the issue :Console Redirection have no function under DOS.
9.Fixed it considers lan2 as usb removable device in os.
10.Fixed AT fail.
11.Fixed it can't run s4 in os.
12.Fixed windowns on /off fail.
13.Make sure "Ac power loss " ok.
#############################################################################
# BIOS:     SEN3AR10   (Base on SEN3AR01)
# Date:     2016/4/28
# CheckSum: C590H
# Sign-on Message:SEN3AR10
# EC Version     :SEN3ER10
#############################################################################
1.First Release.
#############################################################################
# BIOS:		SEN3AR01   (Base on SEN3AR00)
# Date:		2016/3/15
# CheckSum:	C40DH
# Sign-on Message:
# EC Version     :SEN3ER10
#############################################################################
1.Fixed USB3.0 port could not be a "Safely remove devices from your computer" device.
2.Fixed TXE close fail.
3.Modify CPU temperature and system temp name.
4.Add ISMM Module.
5.Fixed it can't get DOS interface with console redirection.
6.Hide some items according bios setup spec.
7.Make sure logo can show normally.
8.Fixed some 8g RAM can't work normally.--It hang ox48.
9.Fixed win10 reboot fail.
10.Fixed password is not case-sensitive.
11.Fixed it hang 99 issue.
#############################################################################
# BIOS:		SEN3AR00
#Date:		2015/12/17
# CheckSum:	642DH
# Sign-on Message:
# EC Version     :SAE2ER02
#############################################################################
Action          :First Release.
#############################################################################
# BIOS:		SAE2AR02
#Date:		2015/9/25
# CheckSum:	173BH
# Sign-on Message:
# EC Version     :SAE2ER02
#############################################################################
Action          :
1.Fixed it can't run burn in with win7 OS.
2.Fixed the screen can't be lighted after resuming from s3.
3.Modify com name in bios setup interface.
#############################################################################
# BIOS:		SAE2AR01
#Date:		2015/8/26
# CheckSum:	FEBDH
# Sign-on Message:
# EC Version     :SAE2ER01
#############################################################################
Action          :
1.It can't flash BIOS in DOS.
2.Fixed it exists yellow mark in OS.
3.Modify com name in os.
4.Add audio table.
5.Show IWDD version in bios setup.
6.Show ATX/AT string in bios setup.
7.Add ac power loss function .
8.AT mode,it will show ac power loss when pressed F3.
9.Fixed com3-6 can't get dos interface with console redirection.
10.Fixed ec com port fail in os and dos.
11.Fixed com6 issue.
   When selected 422 mode,it will show unknow device in os.
12.Fixed HDMI can't play music with its own audio.
13.Fixed it can't get cpu temp.
14.Fixed it has long beep when plugged usb odd.
15.Fixed it can wake up from s4 with usb Devices.
16.Make sure it can install win7 os.
17.Fixed it hang 99 6s.
18.Modify "Primary IGFX Boot Display" to HDMI/CRT.
19.Add pxe lan boot function.
===============================================================================
#############################################################################
# BIOS:		SAE2AR00  
#Date:		2015/7/1
# CheckSum:	2960H
# Sign-on Message:
# EC Version     :SAE2ER00
#############################################################################
Action           :First Release
===============================================================================