###############################################################################
			TANK-870-Q170(SER0)
		    	AMI AptioV Core 5.12 BIOS
###############################################################################
Mainboard	: TANK-870-Q170MB (SAF3)
CPU		: SkyLake-S/KabyLake-S CPU
Chipset		: SkyLake-H Q170
Memory		: 2xDDR4 
Super IO	: F81866D
EC		: IT8528E
Audio		: ALC662 
Lan		: Lan1 Intel I219LM / Lan2 Intel I210AT
iRIS		: iRIS-2400
###############################################################################
WDT			: Int 15h				(F81866)
			  ax = 6F02h
			  bl = value.
			  bl = 0	(Stop counter)

DIO			: Int 15h				(F81866D)
			  Input		ax = 6F08h
		          		al : bit 0-3	
			  output	ax = 6F09h
		          		bl : bit 0-3		
===============================================================================
CPU Microcode: 
	M22906E9_000000B4.mcb(KabyLake)	M36506E3_000000C2.mcb(SkyLake)
===============================================================================
Display		: 
			DDI-B (CH7517A-BF)VGA
			DDI-C DP+HDMI
			DDI-D DP1
===============================================================================
Note:
1.No support IDE Mode
2.No support S1 Status
3.No support HDD Security 
4.Support SBD2/SBD9/SBH6/SBH7
5.DP_HDMI1 not support exchange plug-in after Power On
6.Only Support New Smart fan fucntion.This Smart fan function support Auto or 
Manual mode.Auto Mode will excute output PWM value automatically depend vi two 
Temperatures' bound.So this smart fan function did not support ISMM PLUS Auto 
function.ISMM Plus can changed this smart fan  auto or manual mode.But Auto 
excute PWM value is not Controlled by ISMM PLUS.
7.Support QTS-Gateway function .If it is QTS Mode,Only Support ATX Mode and didn't
  support ACC/NoACC function.If changed to AT mode by AT/ATX Jumper,it just have 
  ATX function.
8.Support keep UUID don't change By command"GO/go" when update BIOS.But command"go me" 
  will changed  UUID to be default.
*******************************************************************************
VSCC Table:
		ATF26DF321(0x1F4700)	W25Q128FV(0xEF4018)[Default]
		MX25L12873F(0xC22018)	MX25U12873F(0xC22538)
		W25Q128FW (0xEF6018)
===============================================================================
Know Issue:
1.IPMI KVM & Power control test failed
2.Auto Recovery will auto run under OS.This is Auto Recovery tool issue.
3.IPMI IP address will not show on BIOS Setup after restart.But you can obtain IP address
  by IPMI Command under DOS.
4.Install Win7(with XHCI Driver) OS by RAID mode sometimes will be failed.
5.When TXT from disable to enable,save and reboot,TPM can't find;When TXT is enabled,
  modify other item default,save and reboot,TPM can't find,"Ctrl+Alt+Delete" can find TPM.
6.Press "Delete" to enter setup,sometimes USB keyboard numlock LED off and its fuction is directiion key.
7.When DP_HDMI+iDP two display plug together,only DP_HDMI dispay under BIOS setup(CH7517->VGA always exist).
8.Only VGA(CH7517->VGA Output) display under Dos.
****************************************************************************************************************
###############################################################################
# Version		:	V2RMAR16	Based on V2RMAR15	
# Date		        :	2019/05/30
# CheckSum	        :	2EC3h
# Sign-On Msg   	:	N/A
# Collect IWDD  	: 	SER0ER11
#******************************************************************************
Action		: 1. Show SW Guard Extensions(SGX) item for customer's require
		  2.Update CPU microcode module to latest follow Intel require(Skylake: C2-->CC; Kabylake: 84-->B4).
		  3.Fixed can't test FPGA card failed after s3 resume under customer's unbuntu OS.
                                  4.Update ME Version to 11.8.65.3590 for intel issues.
###############################################################################
# Version		:	V2RMAR15	Based on V2RMAR14	
# Date		        :	2018/12/03
# CheckSum	        :	9626h
# Sign-On Msg   	:	N/A
# Collect IWDD  	: 	SER0ER11
#******************************************************************************
Action		: 1.Fixed Password will be clear after clear cmos
		  2.Fixed COM1 maybe send some strings when start up
		  3.Hiden CPU_FAN1 Speed for customer's require(BIOS Setup).
###############################################################################
# Version		:	V2RMAR14	Based on V2RMAR13	
# Date		        :	2018/09/11
# CheckSum	        :	4731h
# Sign-On Msg   	:	N/A
# Collect IWDD  	: 	SER0ER11
#******************************************************************************
1. Fixed report PCIe Bus error under Ubuntu.
###############################################################################
# Version		:	V2RMAR13	Based on V2RMAR12	
# Date		        :	2018/08/16
# CheckSum	        :	6AC6h
# Sign-On Msg   	:	N/A
# Collect IWDD  	: 	SER0ER11
#******************************************************************************
1. Modified Smart Fan to manual mode + 100% speed for customer's require.
###############################################################################
# Version		:	V2RMAR12	Based on V2RMAR11	
# Date		        :	2018/08/06
# CheckSum	        :	EDA3h
# Sign-On Msg   	:	N/A
# Collect IWDD  	: 	SER0ER11
#******************************************************************************
1.Remove delay workaround about FPGA can't found issue
###############################################################################
# Version		:	V2RMAR11	Based on V2RMAT13	
# Date		:	2018/07/12
# CheckSum	:	8CFDh
# Sign-On Msg	:	N/A
# Collect IWDD  	: 	SER0ER11
#******************************************************************************
1.Just modified Project name for V2RMAR11
###############################################################################
# Version		:	V2RMAT13	Based on V2RMAT12		
# Date		:	2018/07/06
# CheckSum	:	FB9Bh
# Sign-On Msg	:	N/A
# Collect IWDD  	: 	SER0ER11
#******************************************************************************
1  add uefi pxe item  in setup --> boot
   
    defualt disable uefi pxe

###############################################################################
# Version		:	V2RMAT12	Based on V2RMAT11		M2018060101
# Date		:	2018/07/04
# CheckSum	:	8F09h
# Sign-On Msg	:	N/A
# Collect IWDD  	: 	SER0ER11
#******************************************************************************
1 Always enable PEG0 ,for PCIE SLOT device in PEG1

###############################################################################
# Version		:	V2RMAT11	Based on V2RMAR10		M2018060101
# Date		:	2018/07/04
# CheckSum	:	D09Eh
# Sign-On Msg	:	N/A
# Collect IWDD  	: 	SER0ER11
#******************************************************************************
# MB Version	:	SAF3 V1.04
# Action	:
1.UEFI BOOT enable, both support legacy & uefi boot
2.Add I210, I219 UEFI PXE DRIVER in biosrom
3 first display device set to DP_HDMI
###############################################################################
# Version		:	V2RMAR10	Based on SER0AR33		M2018060101
# Date		:	2018/06/20
# CheckSum	:	F79Fh
# Sign-On Msg	:	N/A
# Collect IWDD  	: 	SER0ER11
#******************************************************************************
# MB Version	:	SAF3 V1.04
# Action	:
1.Fixed can't find IEI FPGA card issue.
2.Add delay for post logo show too quickly
###############################################################################
# Version	:	SER0AR33	Based on SER0AR32
# Date		:	2018/03/09
# CheckSum	:	CD07h
# Sign-On Msg	:	SER0AR33
# Collect IWDD  : 	SER0ER11
#******************************************************************************
# MB Version	:	SAF3 V1.04
# Action	:
1.Update CPU microcode version to 84 &C2 (Kabylake & Skylake)
2.Show [Max TOLUD] item follow BIOS rules.
3.Improve long beep when connected some CD/DVD.
###############################################################################
# Version	:	SER0AR32	Based on SER0AR31
# Date		:	2018/01/25
# CheckSum	:	BBFAh
# Sign-On Msg	:	SER0AR32
# Collect IWDD  : 	SER0ER11
#******************************************************************************
# MB Version	:	SAF3 V1.03
# Action	:
1.Update ME from 11.6.29.3287 to 11.8.50.3425.
2.Update SMBIOS information for H/W V1.04 PCB
3.Modified [ASPM] default to be [Disabled] according to BIOS spec_V2.8.
4.Fixed Auto Recovery test failed
5.Fixed no AMI Logo show after disabled quiet mode 
6.Update CPU microcode module from 183 to 206 version 
7.Fixed VGA+DP_HDMI+iDP together will no any display under BIOS Setup.
###############################################################################
# Version	:	SER0AR31	Based on SER0AR30
# Date		:	2017/07/27
# CheckSum	:	DF67h
# Sign-On Msg	:	SER0AR31
# Collect IWDD  : 	SER0ER11
#******************************************************************************
# MB Version	:	SAF3 V1.03
# Action	:
1.Updated ME from 11.6.25.1229 to 11.6.29.3287
2.Updated Kabylake&Skylake CPU microcode.
3.Fixed test COM3-6 fail in DOS when Plug PCI test device in SB37 or Mini PCIE slot.
4.Show Intel TXT items follow BIOS spec.
5.Update SMBIOS information for H/W V1.03.
6.Fixed TPM1.2 show unkown device under WIN10.
7.Disabled Daylight Saving function.
8.Fixed TPM Status show abnormally after load default on BIOS Setup.
###############################################################################
# Version	:	SER0AR30	
# Date		:	2017/04/26
# CheckSum	:	234Fh
# Sign-On Msg	:	SER0AR30
# Collect IWDD  : 	SER0ER11
#******************************************************************************
# MB Version	:	SAF3V102
# Action	:
1.Fixed SMBIOS information show is not correct
2.Fixed Press CTRL+I can't enter RAID configuration when Post.
3.Show "SATA Controller" on BIOS Setup follow BIOS SPEC.
4.Updated ME version to be 11.6.25.1229
5.Updated CPU microcode to be latest version.
6.Updated VSCC Table for SPI Rom
7.Fixed COM1 Teminal Type is always VT100
8.Fixed TCC functipon is not correct.
9.Fixed IPMI SOL function failed.
10.Fixed AC power Loss did not hiden when AT mode.
11.Fixed always restart when QTS mode.
12.Fixed J_CMOS jumper can clear date & time.
###############################################################################
# Version	:	SER0AT31	
# Date		:	2017/03/17
# CheckSum	:	2DB7h
# Sign-On Msg	:	SER0AT31
# Collect IWDD  : 	SER0ER11
#******************************************************************************
# MB Version	:	SAF3V101
# Action	:
1.Fixed COM1 Qtpro/Burlin test report errors
2.Fixed show "BPF Version check Error" on logo when start up.
3.Fixed Console Redirection failed in DOS from COM2.
4.Add IWDD Version/IPMI show on Main page.
5.Modified "Boot option filter" to "UEFI Boot" on Boot page.
6.Show AMT configuration follow BIOS SPEC.
7.Add PCI routing for PCI slot on BackBoard
8.Add Primary IGFX Boot Display function follow H/W design
9.Modified Graphic items follow BIOS SPEC.
10.Fixed start up hang logo(0x99) about 5~6 seconds.
11.ixed can't flash EC under DOS.
12.Fixed Auto Recovery can't restart when OS crash.
13.Fixed Start up's beep is too long when usb CD/DVD device connected.
###############################################################################
# Version	:	SER0AT30	
# Date		:	2017/02/10
# CheckSum	:	2646h
# Sign-On Msg	:	SER0AT30
# Collect IWDD  : 	SER0ER11
#******************************************************************************
# MB Version	:	SAF3V101
# Action	:
			First Released