#############################################################################################
			WAFER-BT-R10 (SAD3) AMI Aptio 5.009 BIOS
#############################################################################################
Mainboard	: WAFER-BT-R10 (SAD3)
Chipset		: Baytrail- SOC+F81866+IT8528+LAN1(I210)+LAN2(I211)+ALC662
SPI chip	: W25Q64FWSSIG
IPMI chip	: N/A
=============================================================================================
WDT:	Int 15h				(F81866)
		ax = 6F02h
		bl = value.
		bl = 0	(Stop counter)

DIO:	Int 15h				(F81866)
		Input	ax=6F08h
		al:bit 	0-3	
		output	ax=6F09h
		bl:bit 	0-3
================================================================================================
CPU Microcode : 
	M0130673	M0130678	M0130679	M0C30672	
	M0C30678	M0230673	M0230678	M0C30673	M0130679
================================================================================================
Note :1. Fixed HSIC--USB HUB- USB PORT can't use in DOS and bios setup.
         XHCI Mode -Enable ,it can use in dos and bios setup.
#############################################################################
#############################################################################
# BIOS:     SAD3AR15    ( Base on SAD3AR14)   NO. 2016090010
# Date:     2016/12/13
# CheckSum: 61D7h
# Sign-on Message: SAD3AR15
# BIOS SPEC:    SAD3_BIOS_Specification_V1.0
#############################################################################
Action :
1.Fixed it is not sensitive to CapsLock,when set password.
2.Update Vallyview cpumicrocode.
3.Update Usb module.
4.EHCI hand-off   :Enable.
5.Fixed it exists long beep when plugged USB Boot devices.
6.Add InfoReport_A5_02_01 module.
#############################################################################
# BIOS:     SAD3AR14    ( Base on SAD3AR13)
# Date:     2016/8/15
# CheckSum:5F7A h
# Sign-on Message: SAD3AR14
# BIOS SPEC:    SAD3_BIOS_Specification_V1.0  
#############################################################################
Action:
1.Fixed DIO--- output pin fail with ISMM tool .  
2.Fixed it can't load to default time and date ,after clearing cmos by jumper.
3.Fixed when set password ,it is not sensitive to CapsLock.
4.Add CPU [C State] item, and Default is [Disabled]
5.Hide "HDD Security Configuration:"
#############################################################################
# BIOS:		SAD3AR13	( Base on SAD3AR12)
# Date:		2016/1/27
# CheckSum:	4B14h
# Sign-on Message: SAD3AR13
# BIOS SPEC:	SAD3_BIOS_Specification_V1.0
# VBIOS:	VGA.dat		
#############################################################################
1.Fixed it hang 0xa0 when run win7 reboot.
#############################################################################
# BIOS:		SAD3AR12	( Base on SAD3AR11 )
# Date:		2015/11/23
# CheckSum:	0089h
# Sign-on Message: SAD3AR12
# BIOS SPEC:	SAD3_BIOS_Specification_V1.0	
# EC Version:	SAD3ER10
#############################################################################
1.After clearing cmos ,it can't save the set UUID data.
#############################################################################
# BIOS:		SAD3AR11	( Base on SAD3AR10 )
# Date:		2015/10/29
# CheckSum:	01CAh
# Sign-on Message: SAD3AR11
# BIOS SPEC:	SAD3_BIOS_Specification_V1.0	
# EC Version:	SAD3ER10
#############################################################################
1. Modify ICP String.
2. Show iwdd version.
3.Fixed L2 cache show error(512kb *1) in bios setup with E3825 CPU.
  Now show the correct string :1024KB*1.
#############################################################################
# BIOS:		SAD3AR10	( Base on SAD3AR02 )
# Date:		2015/9/23
# CheckSum:	9E2Dh
# Sign-on Message: SAD3AR10
# BIOS SPEC:	SAD3_BIOS_Specification_V1.0	
# EC Version:	SAD3ER10
#############################################################################
1. First release.
#############################################################################
# BIOS:		SAD3AR02	
# Date:		2015/8/17
# CheckSum:	CA34h
# Sign-on Message: SAD3AR02
# BIOS SPEC:	SAD3_BIOS_Specification_V1.0
# VBIOS:	VGA.dat		
# EC Version:	SAD3ER01
#############################################################################
1.Support one/two channel memory.
2.Fixed HSIC--USB HUB- USB PORT can't use in DOS and bios setup.
3.Hide sys fan speed.
4. Turn off IR.
5. Fixed USB2.0 port can not popup  "Safely remove devices from your computer". 
6. Add new autorecovery function.
7.Fixed it doesn't show logo normally during post with DP-LVDS Card. 
#############################################################################
# BIOS:		SAD3AI01	( Base on SAA8AI13 )
# Date:		2015/4/28
# CheckSum:	463Bh
# Sign-on Message: SAD3AI01
# BIOS SPEC:	SAD3_BIOS_Specification_V1.0
# VBIOS:	VGA.dat		
# EC Version:	SAD3ER00
#############################################################################
1.Fisrt Release.